Blue team

Analytical lifting, how Olympic Weightlifting helped with my IR workflows/analysis

m0rt0n86Leave a comment

Don’t worry I am not going to make this a #dfirfit post with lifts and all of that but wanted to share how my Olympic Weightlifting (which is “technical” in the sense of movements/positioning and mindset) helped strengthen my IR workflows/analysis when I have investigating. Now I am not saying everyone should go lift and they will magically be a better at their job (though it could help with stress and other things, but that is not the point here). Just wanted to share some personal experience and something I noticed after some time off from lifting due to my chronic health issues. Before anyone ask why I lift this way versus just general strength and conditioning it just happens to be a form a movement I enjoy (granted its a love/hate relationship) and I also do enjoy the competition aspect of it as well… Just don’t tell my anxiety that but also at the same time I use it as a tool to work on that

Now why be analytical with this? as someone that is mostly a remote athlete I sort of had to as I do not get direct feed back like I would if I was at my gym lifting (Don’t worry I do record lifts and send them to my coach and do try and make the commute out to the gym when I am feeling good). As I’ve developed a connection with how my body is moving from yoga even before I started lifting so I had a slight advantage per say. You will get to a point when you can feel that your weight is shifted to a pinch foreword or you transitioned from your first pull to your second pull a pinch earlier than normal. A lot of this is just minor variations that happen in a lift and most of the time the faults come from when you first start pulling the bar of the ground and next time you know you have a learning opportunity for your next lift/session. It’s these small little details you need to pay attention to and feel and you work on rep after rep after rep and also doing accessory movements and prehab for imbalances you might discover you have/ares you need some work at.

Ok I bet you might be wondering what the hell any of that means if you don’t lift or how that ties into not even incident response but just general analysis (or to keep it “cyber” a SOC analyst). Well I’ll break it down into nice little bullet points of things that helped me along the way and to help make sense of the things I noted above and take what you want from it. Maybe it might help you realize that hobbies you enjoy could still help you with skills you might need in your “9-5”.

  • First and foremost, You will make mistakes and you will “miss lifts”
    • Tying the miss lifts in you will miss read a log/data set, might think an alert is a false positive, or go down the rabbit hole analyzing trace data/mft and try and follow the “bad thing” only to find that it was just either an IT background script or just the way a peice of software worked and be a false positive after all. This is hard concept as no one likes to be wrong, no one likes to miss when it comes to lifting (or to bomb out at a meet, aka not make any lifts at a meet) or because something was missed a P4/P3 incident turns into a P2/P1. No one is perfect (good luck telling that to use of ADHD/Anxiety…which is a hole other subject). You will make mistakes it is how to take them and if you like them beat you down or take them for what they are, something to learn from and grow. I know back when I was doing engineering the joke always was if you don’t take down prod once, are you even a sys admin/engineer? Well I attempted to patch and update the SIEM at my old job and it was down for a month…talk about a “learning experience”. Now obviously there are situations that can be more dramatic and hit harder (ie ransomware) but feel that shittyness for a bit (because feeling emotions is good as I am learning) but you need to noticed that weakness and make it an area to work on, talk with your manager/leadership about training or going outside of work for mentorship/guidance on it, research it and come back better for it after you get some “reps” in. but for a TL’DR don’t quit because you missed, make it something you can learn from and grow and reconise when you are falling back into bad habbits
  • Successories…aka accessories movements..aka training/research
    • I know I mentioned with the main lifts you are doing rep after rep after rep which gets you strong in those positions and gets you to feel things for your core lifts or core job/skills for job. If there is one thing I have learned from both of these is you can always learn something. Technology is always changing so you need to do what you can (not burn yourself out in the process) but make time if you can for doing accessory’s or trying that can help out with your primary job function even if it is just a different way of doing one of the task. In a weightlifting approach it might be doing clean pulls or snatch deadlifts, it’s not a full snatch or clean but helps us work on those positions we need to get stronger at for core skills. This would also be doing CTFs/Labs with different tools that you might not be used to using. Another example would be hamstring curls, pull ups, farmers carries, or even curls to hit weak spots that will help with the main lifts this might be learning a specific function of a tool better or learning how to write more complex detection’s/queries, or just general researching malware/vulnerabilities that have been affecting $employer. Again the purpose of these are not to burn you out or lead to more fatigued if you are having an off day, pull these back or skip them. Also if you cane get $employeer to help with this, and get leadership support, awesome! I am also not saying to go buy subscriptions to every place too follow the KISS methodology about it and if you noticed an area bring it up and try to work on it when you can. Which also ties into the first point I made about not giving up because you made a mistake or weren’t perfect about it. Before I forget this can also be soft skills too (Lets be real, most of us also need to work on writing reports/documentation…)
  • Communication is key
    • Not just the external communication but also internal…listening to your body and how you are feeling. You might have days were you had some personal/family stuff going on (or in my case chronic health issue) and just are not feeling it, having issues with simple task (which can be frustrating and again lead to point number 1 and why I made it the first point). Talk to your peers/managers/leaders or in a lifting sense your coach. You might need a day or two with pulled back responsibilities or even need to take some mental health/”sick” days to recharge a bit (this also does not make you weak FYI). If you don’t tell anyone what is going on no one will know and can help. You are just going to push though and while it might not lead to a physical injury like with lifting it will likely lead to burnout or just emptying your..umm..f’s to give which leads to mistakes and can start a negative cycle really quick. This also leads to the prehab stuff as if you have something that is nagging its going to make things harder so work on addressing by communication and building a network/support system to help with those nagging issues can get you back on track along with sucesories. Being honest this is still an area I am working to improve on but still wanted to include it
  • Slow is smooth and smooth is fast…positions
    • AKA workflow. Not talking about IR playbooks or anything like that but how you move though your work ie how scope out/triage an alert/event/detection, how your handle endpoint investigations, or log analysis. Some certifications or blogs will tell you a way to do it, much like there are defaults/standard form for lifts but you need to make adjustments as someone that is 6’2″ my start with lifting or position is not going to be the same as someone that is 5’2″ (lets also leave mobility out of its too..) You need to find the methods that work for you and almost make them clock work and get good at feeling for them or the timing in a sense (aka when you need to pivot to another dataset or how you handle investigation). Obviously laws, regulation, or policy might dictate the end results (ie how things need to be noted on evidence/chain of custody, templates for reports) but making the bulk of it work for you and your mind works and likes to “move” or handle things will only aid you and make the bulk of the work flow better and lead to less jumping around and help with interpreting/automating things which can also help if you actually do have the ability to build out automation via playbooks with SOAR, Jupyter notebooks or other functionality like that

I was going to make this a bullet but since it ties into the first bullet with networking/mentorship and communication but getting a coach versus trying to do it all on your own can help with. Also try and have fun…I know some days are going to suck and be hard but try to enjoy it the best you can. This isn’t your life it is just a piece of it. I know there is the push of grind culture and if that works for you cool. But personality I know when I am on my death bed or when my time comes I would rather be remember as someone that did the work and had some passion but was still human and a decent person versus no one being there but hey they caught an alert that stopped APT 29 or only lived to lift..

Take from this what you can I know some of the lifting analogy might not fully work for some but really this has been on my mind for a little while now and felt like writing about it. I’m sure I might need to make some updates down the road but this was a lot more mentally fatiguing than I thought it would be. Maybe I should of gotten on my soap box and ranted and saved this for a rainy day, but I found it interesting how hobbies and other things helped my in my career development and might help others tie in hobbies and other activities and see how the lessons learned can help build in other areas.

DEF CON 28-DEF CON Safe Mode

m0rt0n86Leave a comment
DEF CON needed to Run some A/V…Image (c) © DEF CON

First DEF CON, first full Virtual conference I attended. This post is going to be in different parts with with the overall experience, the things I really liked and kind of an simple overview of the OpenSOC CTF (which I thoroughly enjoyed). I am still trying to get caught up on some of the varies talks from the other villages as a lot of my time was spent working on the OpenSOC CTF and the various workshops/panels with Blue Team Village (BTV). I was hoping to do a better write up but life found away and I wanted to try and spend some extra time with my wife since me being “Out” due to DEF CON put some extra strain on her

What I really liked?:

  • OpenSOC CTF: This was my first time doing the OpenSOC CTF and was not sure what I was fully getting myself into as I was used to the other jeopardy and other styled more red team focused CTFS with web-apps to break, Stenography, and some Forensics challenges but what really captured my interest was this was more like a full fledged SOC environment and you had to investigate several different incidents. The tools I have never really used before or interrupted (PF sense, Thinkst Canary tokens, OSQuery, Suricata, Greylog, Snort, Velociraptor, and Moloch). Thankfully the Blue Team Village had some early “workshops” showcases the tools and how to use them. While learning the syntax of each of the different tools (thankfully Greylog is built on top of an ELK which I do know some of the Syntax for) But once I learned the syntax and got a better idea of what I was looking for it I was able to do good on following the trail of several challenges. Which they did lead on each new “flag” was just adding another piece of the puzzle and told the story of what you were looking at.
    The networking portion of looking at the events/logs from firewalls/IDS/email I did really well with (along with packets) but once we got into the nitty gritty of filtering though Sysmon (thanks to WinLogbeats) and other endpoints I started to falter a little, I know its an area I am currently working to improve on with DetectionLab. I was able to figure some events out (like power shell script running and what script was ran and was able to pull some “IOC’s” but what made this not fun, was trying to bounce between this, the workshops I signed up for and the various talks/panels…and you know eating XD (I know it was DEF CON but I’m not about that life).

    I was not expecting to win or even go top 10 doing it solo but for my first time using the tools and finishing at the lower end of the 50th precedential or so I’m pretty pleased with my self and I got some weak spots I need to work on and that is perfectly ok!
  • Workshops: While there was some bad as it was a FireHose at some points (and one being around 10PM EST) but these really were the bread and butter other than the OpenSOC CTF. Every since I did a splunk workshop at GrrCON last year (it was really a guided Boss of the SOC v2 AKA BOTS v2) I try to get into workshops. The ones I really liked were creating Jypter notebooks playbooks for threat hunting, NSM in the cloud (deploying Securiyt Onion on AWS..noice). and also writing Yara rules. I know I need to look back on the Yara rules and Jyper notebooks as A) I was really tired and B) in the middle of a good flow with the OpenSOC CTF XD.
    Both are tools I want to get better at using/understanding to help automate some things and to build up better rule sets (in the case of Yara). There was also one with IR which was good, but it was like a CTF and I’ll guide you (which I need to find the link for as it is always up) Thankfull the slides were shared to attendees so now that things are calming down a little a gain its time to go though them again (doubly so once I finish my Detection Lab set up as I also want to add RITA from Active Countermeasures and maybe a metasplotable or OSWAP Juice box vulnerable web app) I can start really applying these and playing around with them. That is the con that if you don’t use it right away, you lose it and this was really the case as back to the normal grind of $employer I really didn’t get a chance to work with these as catching up and other stuff I didn’t get the chance to review/play around like I wanted. If this wouldn’t of been so delayed it would of helped too XD
  • Talks/Panels: Part of the reason why It’s taken me so long to write this is I am still trying to catch up on talks from all the villages. I know being from the Metro Detroit area I spent some time getting some entry knowledge with automotive hacking and some of the basics of automotive networks which I was clueless about, it was good that it was pretty cut and dry simple and wasn’t overly complicated. I really did enjoy the panel talk on IR. As someone that has a rapidly growing interest in DFIR/Threat Hunting/NSM and more active defense (Decoys/Honeypots) this was really informative to listen too from people that do that for a living and get some insight. Another good talk was about BlueSpawn It was funny we just worked with this with on my intro to securtiy course with John Strand/Black Hills Information Security. It was neat to get more background on the tool and part of the reason for its development. If you don’t know Blue Spawn is an open source active defense/EDR product based in Powershell (at lest for what we used it for with the course).

not bad in itself, but made it hard

  • Discord…It was nice for all the Villages and DefCON to have seperate channels. however, the alerting was so distracting with people posting in all the channels. I tried to mute were I could, but then I’d miss things or just ignore channels all together (Sorry Red Team Village). Also I’m “that guy” that has the taskbar on top set to autohide (its clutter) so everytime there was a new ping start menu would drop down and just be distracting. Granted I know this is small and really it was nice to have it “break out” like that and now they are live communities still even after DefCon. But for someone that gets distracted pretty easy or annoyed with things, this was a big no from me XD.

I know this was long over due but with work and trying to take care of some projects around the house due to DEF CON and weather that needed to be taken care of. This was probably the only way I’d be able to attended a DEF CON as I’m not sure the wife would be thrilled with me taking PTO to go fly to Vegas to attended this. Maybe if I can talk to my $employer/contract house and see if they can cover some of it. Maybe life might find away and I get head out that way and maybe score a badge (or a BTV one as well)

On-words to Wild West Hackin’ Fest in a few weeks!

Wild West Hackin’ Fest/Black Hills Information Security-Intro to Security 0(3) day

m0rt0n86Leave a comment

Today we shifted from logs and NSM and pivoted over to the endpoint with Advance Endpoint defection (Think Endpoint Detection and Responses…aka EDR). Or for you new TLA XDR or Extended Detection Response…but that covers more than just endpoint..and is above the scope of this blog. Gee I just got started with this and I’m already going off course…ANYWHO. We also looked at how to test what your end points are able to detect with tools like atomic red team, bloodhound the labs focused on today on using blue spawn (open source EDR) with atomic red team and even our little “exploit” we created back when we tested in app locker. There was also a touch on using host based firewalls and segmented networks (even by endpoint!) and a touch about architecture and needing not just defense in depth/layer security but overlapping segments. So you know your weak points and know what coverage you have is something fails.

Like mentioned before EDR is better than your traditional normal run of the mil AV and standard endpoint defense , which isn’t super helpful (though I guess EDR is going to be coming more of a standard). EDR products look at asset holistically and looks at processes and connections, which in DFIR world, is a huge advantage because you have a the chain of events that happened on the end point which in turn can help with the whole cyber kill chain. EDR can need some tuning work depending on certain processes that are being ran by system admins. Now you have an EDR solution and want to make sure it is detecting/alerting/monitoring things. This is were threat emulation can come into play, even if you are not full on red teaming but this can be useful to see how your EDR solution is working, or even other products within your environment as well. Instead of just the normal pop a vulnerability or missing patches or everyone’s favorite miss configured services, it goes into what happens after an attacker gets access (if you think your not going to get breached, hate to share bad news, but its going to happen). This help with lateral movement, different processes that could be used to try and escalate privilege, or infect system. I was really excited to do these labs with Blue Spawn (free open source “EDR”…not useful for full prod but for testing out the tools coming up, super useful).

We discussed Caldera which is created by the folks at MITRE (aka the people who created ATT&CK), Atomic Red Team, and Blood Hound. Caldaera and Atomic Red team can on assets and if you have your EDR/End point protection services in monitoring/alerting, While Bloodhound can map how an attacker could get admin/full domain admin permissions in your network. It was great to play with Atomic Red Team (I say that as I am currently wearing one of their swag shirts) and see how it works. The one point John made is not to be afraid of running these tools, even if it borks/breaks things. It just means you are doing your job even in an IT role of you don’t have a “whoops” moment (I myself have taken down our SIEM at work…was a good time). The other point is if you were worried about back doors in these open source tools, how many back doors have been found in other products? firewalls, endpoints, networking equipment all have been found with Backdoors on them. John also mentioned that while these tools are great. Don’t focus on the ATT&CK Bingo and blocking all the ATT&CK. Attacks change and with a few changes your not detecting it and bypass. This is were the commercial offerings can come into play (like Scythe, Attack IQ) to go around the basic ATT&CK building blocks and can use customer attack methods to check what you detect.

The last section was host based Firewalls, if your not segmenting your networks, plz start. All the way down to your desktop and between subnets as pass the hash/ticket and SAT impersonations have worked. You need to assuming you are going to get compromised/pwned (for real). What is really bad, attacker persisting and being able to move laterally/ and pivoting systems. John had some good images showing different things that might not show alerts (not going to copy as an encouragement to take the course in November). You can even just use the default windows firewall, but news flash: most of your endpoint protection vendors have built in firewalls as well and can be centrally managed and are far easier to be used than the netsh advfirewall.

Remember with all of these, think about how they overlap and look for potential weak spots and look at how they can mitigated and ensure you have overlap going over the endpoint/assets to help have a good basic security architecture. I do like how John did break it down into overlaps versus the defense in depth. As normally people think firewall, IDS/NIPS, Endpoint protection but think of it like this:

Chart that John Stand had to show overlap between Network Security Monitoring (NSM-Sec Onion/Rita, Firewall alerts/signatures/traffic), netflows) Securtiy Incident Event Manager (SIEM), the Combo Plater of AV/Endpoint Detection Reponse (EDR) and UBEA (See Blog post from yesterday…User and Entirety Behavioral Analytics (UEBA, or noted as UBEA here)

I think this is super useful to think about versus the castle or other methods. We also did a quick talk on PVLAN’s were the firewall helps control access to the vlans (I need to look at this more).

Since the Nmap lab and Shodan off roading adventure is almost over, Time to get back to paying attention today to the last day. Doubly so since I am going miss an hour or so due to doctors. Thankfully some of these last topics are stuff I do with my day to day so it wont be to bad 🙂 with a hopeful bonus section on using ADHD 🙂

Wild West Hackin’ Fest/Black Hills Information Security-Introduction To Security-0(1)day

m0rt0n863 Comments

I was debating on doing this as a end of the week post with going over things that were discussed and things that I learned, but the shear amount of stuff getting covered i feel that’d just be a huge wall-o-text and need a TL;DR. While this is staying pretty wide over 11 topics that if you are doing, and doing well are a great starting point you can tell the team at Black Hills Information Security (BHIS) lead by John Strand there is still a lot…just not the firehouse SANS type or other “boot camp” styled courses.

Today the first day of the course which of course started with John going on some of his uhh…rants about treating your internal network as hostel (ie treat it like your local coffee shops network), don’t just use one security vendor/product, and compliance, which are ones I agree with in terms of compliance and just checking the box when really you should use compliance/audits to help push the org security posture. I know its easier said than done though as Security is a cost center so you need to apply proper risk to sell the point of doing more than just 7 character passwords for PCI-DSS as an example (even though its less of a requirement than the NIST green book from the 80’s…I Digress). We talked about the 11 controls/Key Tracking Indicators which they call the atomic controls they are:

  1. Application Allow List
  2. Password Controls (Good ole IAM)
  3. Egreess Traffic Analysis
  4. UEBA
  5. Advance Endpoint Protection
  6. Logging (which I noted properly, not just a log toilet for a SIEM)
  7. Host (endpoint) Firewalls
  8. Internet Allow List
  9. Vulnerability Management (done properly based on Biz/org risk and actual asset inventory)
  10. AD Hardening
  11. Back up/recovery

I’m sure to anyone who has been in the security business will know some of these and also tieing some of these things into the MITRE ATT&CK Framework (which was a good point to not play ATT&CK Bingo/Jinga)

What was super ironic is right after this we pivoted to compliance. Learned about the useful tool of audit scripts to help with auditing with various compliance standards and see where you stand. Fun fact, everyone in the course went to the site and we may or may not of DDoS the site with a hug of death. This can help break things into smaller frameworks and can cross reference into your other core frameworks

For me the next part with the Application Allow list hit home, as dealing with doing Deny list on Proxy is a pain in the butt, I didn’t even think about it from an endpoint prospective. I watched this Live at a GrrCon talk were Dave Kenedy just updated Magic Unicorn and just change a character of text and he was owning his test windows box as windows defender and other products didn’t have that signature for the deny list. it was brought up in the course that attackers are breaking up power shell into different parts of scripts now. It was cool to look at Ghost writing aka making a ruby executable with meterpreter, make it a .asm file, edit the asm file, convert back to .exe and you are an infosec wizzard because you edited something in assembly (john’s joke). We also talked about encoding and AV bypass with encoding and obfuscation (see above with GrrCon example). We then went on Application whitelisting using Whitelisting Directories (simply only allowing applications to run in certain directories). While can be bypassed many initial access attacks (drive by downloads) are executed from the downloads, desktop, or temporary directories. Hash whitelisting was also discuses, but the ease of implementing and keeping up to date is a pain, just like Digital certs as not all vendors sign all their .exe or .dlls. For this course we used AppLocker (which I’ll admit it has been a minute since I heard anyone mention this). Native to Windows can whitelist and/or deny based on Path, Ash, Cert, vendor. We created a simple policy just with the defaults of allowing the program files, and windows directories. The on thing that could catch admins off guard is needing to turn on the windows service “Application identity” on the local systems (I’m assuming you could push this out from your AD network if needed) to be enabled. You also need to push the GPO out, as was a issue the demo gods did not like as you need to wait for replication between user accounts in our case.

The next fun was everyone’s favorite Password Controls (I can hear your groan from here). There was a good discussion on password spraying with everyone favorite <sesson><year> (I’m sure password or other default creds can be used if you know any of the devices from any recon you have done as people are smart and forget to tweek those or system accounts). Of course this requires a harvesting attack before the attacker will plug the ID’s into burp and try their best. Once that account is pwned without proper monitoring or UBA it can be hard to detect. We talked about two tools (credking and FireProx).

The big issue that was discussed is that just because you have 2FA/MFA org’s still have password policies between 8 and 10 characters. This only can be somewhat good if it is 2FA/MFA across the entire board, if not bad things are going to happen as you have a 8-10 charter passwords that can get pwned in as little as an hour or so (or even faster if the attacker has a password cracking rig). A good idea for compliance and auditing is having regular scanning of authentication points (with regular penitent-John). Regardless of 2FA/MFA encourage the use of passphrases, Just a few random words that make a phrase. still for complexity and to throw off password crackers add that might be using dictionary attacks (using common dictionary words to brute force passwords) ensure there are numbers and special characters. These can be easier for users to remember as they can use dictionary words to make a random phrase they can remember. You can also use a password manager with a good passphrase and 2FA to help you or your users with passwords (it can help avoid the password reuse or just changing 1 character). But with a password manager if it gets breached, all your accounts could be compromised (again no worse if you use the same password for everything so a good first step is to stop that).

There was some basic 2FA (as mentioned above) aka something you know and have. can be tokens, SMS, or app based (all are better than no 2FA). It was pointed out how to attack SMS 2FA with SIM cloning. After this brief talk on 2FA (as you can talk vendors and different ways to set up 2FA and this is just an intro course after all) We talked about the bane of just about any IT professionals work life, Service accounts. AKA accounts that are used by products to do things, or in scripts were when you change a password you could borked production on a Friday and be the on call guy and get to have an adventure. These need to have passwords that expire and have lockouts. Even if it causes an internal outage, they are used by attackers as they can be overlooked. We then applied what we learned about passwords and how fast they can be cracked with Hashcat. I was so used to John the Ripper from School (almost 3+ years now…crazy) and doing Rainbow tables (which was discussed how now effective they are compared to lets say Hashcat). I’ll admit I will probably have a blog post shortly with some Hashcat adventures once I get my home Lab fully set up, and when its not muggy/hot in my study (its upstairs and its currently in the mid 90’s and muggy, I don’t need a 1RU server making it even more toasty up here) and get some time with that to get more experience with it. Even as someone who is more on the Blue team/DFIR side of the house, understanding how this tools work allows you to better understand the risk they pose and possible attack vectors attackers might use when trying to get password hashes.

We didn’t get to password spraying today so that will be done tomorrow. Hopefully I remember to pop in the 1/2 hour early to get the quick refresher, might be useful for poking my deception systems at work when I am back to work to see how they are alerting XD

Looking foreword to tomorrow though with egress traffic analysis, as someone that is more analytical I love looking at logs and trying to make sense of them and PCAPS and I already see the notes about Tuning with UEBA (which is part of our jobs like it or not if your more on a blue team focus).

Though wondering if we are going to make it that far tomorrow. Regardless of were we get there is going to be a lot of good info and some shenanigans along the way!

BHIS Webinar Intro to Cyber Deception

m0rt0n86Leave a comment

On 1/23/2020 I attend a webinar from the fine folks at Black Hills Information security on an into to Cyber Deception (aka Honey pots). As someone who might be getting shifted into a more proactive security role versus all the things I handle now I was really interested in this subject.

What really though me off was how John Strand tied this very thing into more applicable threat intelligence. As someone who was also intrested in Cyber threat intel. Mostly steaming from the fact I could of done intel when I was enlisted, but chose logstiics because it used computers…Anyway. Getting threat feeds and currently working with Minemeld at work as well to help automate some of our responses to known IoC. The interesting and kinda “bad” about feeds is that they only deal with IoC’s that have hit all kinds of industries and who knows how old they could be after IR and forensics teams got the info out, there very well could be old now. They also do not deal with active threats hitting your enterprise, so you could be blocking a bunch of threats that have nothing to deal with your enterprise and could have attacks going on not getting blocked or looked at. This really hit me as something that is useful being able to get an attacker trapped in a honeypot and alerting on a honey account (an admin type account that no one should have access too so it can alert on SIEM or some other tool of your choice). with this going on you can look for IoCs possible C2 servers and the possible attack vector being used along with possible source IPs.

Black Hills Information Security Honey Pot Linux distro Active Defense Harbinger Distribution (ADHD)

What was also good about this webinar as I learned about Active Defense Harbinger Distribution(ADHD). Similar to Kali or even Flare-VM with how they handle pentesting or reverse engineering, ADHD handles with setting up honeypots. The tools are welly documented and have a basic walk-though with each tool. I will need to get some time fully go into using this for testing on my lab to see how these function more. This will also be a combo as I can use this traffic I generate attacking these honeypots to further learn some packet/traffic analysis as well. Still before I fully go after this I think I might need to finish setting up my Security Onion server and my FortiGate firewall.

I’d like to thank Black Hills Information Security for this great webinar, I wish I had taken some better notes or had the time to configure ADHD before posting this, hopefully I’ll get some tinkering this week.

Link to the slides:https://www.linkedin.com/posts/black-hills-information-security_getting-started-in-cyber-deception-activity-6626562689147695104-hFbJ